CHAPTER 10: MAINTENANCE OF PERSONNEL HEATER AND CONNECTING
TM 9-2350-256-20
COMPONENTS, AND FIXED FIRE EXTINGUISHER SYSTEM
10-6 REPLACE/SERVICE FIRE EXTINGUISHER SYSTEM CONTROLS AND LINKAGES
THIS TASK COVERS
a. Removal
b. Installation
c. Adjustment
INITIAL SET-UP
Tools:
Parts:
Equipment Condition:
Tool kit, general
Gasket (Appendix G, item 63)
Heater control box removed
mechanic's (Appendix C,
Lockwashers (2) (Appendix G, item 105)
(see paragraph 6-12)
item 53)
Lockwashers (2) (Appendix G, item 130)
Riveter, blind (Appendix
Lockwashers (2) (Appendix G, item 132)
C, item 42)
Lockwashers (2) (Appendix G, item 137)
Rivet (Appendix G, item 236)
Seals (4) (Appendix G, item 266)
a. REMOVAL
1 Remove two seals (1), two manual control levers (2), and two fastener assemblies (3) from two cables (4).
2 Remove cover (5) by removing three screws (6).
3 Remove pull-release mechanism (7) and gasket (8) by loosening two nuts (9) and two lockwashers (10) and pulling
cable through pull-release mechanism.
4 Pull two cables (4) through hull and remove two lockwashers (10) and two nuts (9).
5 Remove two adapters (11), two swivel connectors (12), and two conduits (13) from two cables (4).
10-16