CHAPTER 14: MAINTENANCE OF MBA3 GAS/PARTICULATE FILTER UNIT TM 9-2350-256-2014-1 REPLACE/REPAIR M8A3 FILTER UNIT SYSTEM-Continued10Disconnect and remove cable assembly (25) from circuit breaker and switch assembly (26) and M2A2 air purifier(27).11Disconnect and remove cable assembly (28) from circuit breaker and switch assembly (26) and dome light (29).12Remove ground wire (30) from M2A2 air purifier (27) by removing screw (31) and lockwasher (32).13Remove circuit breaker and switch assembly (26) by removing two screws (33) and two lockwashers (34).14Disconnect and remove driver's hose (35) and FWD passenger's hose (36) from manifold of M2A2 air purifier (27)and clamps (37). Remove 12 clamps (38) by removing from each pair screw (39) and lockwasher (40).15Disconnect and remove AFT passenger's hose (41) from manifold of M2A2 air purifier (27) and clamp (42).16Remove two clamps (37) and clamp (42) by removing from each screw (43) and lockwasher (44).14-4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business