APPENDIX H: USAREUR SAFETY LIGHTING MODIFICATION KIT
TM 9-2350-256-20
H-1
STOPLIGHTS AND COVERS-Continued
NOTE
The following procedures apply to both left and right stoplights.
a.
REMOVAL
1
Remove two screws (1), two lockwashers (2), and cover (3).
2
Disconnect four electrical cables (4).
3
Remove two screws (5), two lockwashers (6), two ground leads (7), two flat washers (8), two bushings (9), and
two grommets (10).
4
Remove grommet (11) and taillight (12), pulling electrical connectors through grommet hole.
5
Remove two nuts (13), two ground leads (7), and two lockwashers (14).
6
Remove two electrical cables (15 and 16) from clips (17). Remove screw (18), electrical cable (15), lockwasher
(19), and nut (20).
7
Remove two screws (21), two clips (17), two lockwashers (22), and two nuts (23).
H-2
