TM 9-2350-256-20
a.
REMOVAL
1
Disconnect wiring harness (1) from flasher (2).
2
Remove two screws (3), three lockwashers (4), flat washer (5), ground lead (6), and flasher (2).
3
Disconnect wiring harness (7) from warning horn relay (8).
4
Remove two screws (9), two lockwashers (10), and warning horn relay (8).
5
Remove two screws (11), two lockwashers (12), and mounting p late (13).
b.
INSTALLATION
1
Install mounting plate (13), two screws (11), and two new lockwashers (12).
2
Install warning horn relay (8), two screws (9), and two new lockwashers (10).
3
Connect wiring harness (7) to warning horn relay (8).
4
Install flasher (2), ground lead (6), two screws (3), three new lockwashers (4), and flat washer (5).
5
Connect wiring harness (1) to flasher (2).
H-5
