APPENDIX H: USAREUR SAFETY LIGHTING MODIFICATION KIT
TM 9-2350-256-20
H-2
REFLECTORS AND MOUNTING PLATES-Continued
NOTE
The following procedures apply to both left and right reflectors.
a.
REMOVAL
1
Remove two screws (1), two lockwashers (2), and reflector mounting plate (3).
2
Remove two screws (4), reflector (5), two lockwashers (6), and two nuts (7).
b.
INSTALLATION
1
Install reflector (5), two screws (4), two new lockwashers (6), and two nuts (7).
2
Install reflector mounting plate (3), two new lockwashers (2), and two screws (1).
H-3
FLASHER ASSEMBLY AND RELATED PARTS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C, item 53)
• Lockwashers (3) (Appendix G, item 115)
• Lockwashers (4) (Appendix G, item 116)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
H-4
