TM 9-2350-256-20
H-14 DIRECTIONAL SIGNAL/DIRECTIONAL SIGNAL LAMP WIRE ASSEMBLIES
(12322648)
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.
NOTE
The following procedures apply to both left and right wire assemblies.
Connector No.
Electrical Lead To:
Wire No.
1
Adapter assembly (12322647)
460/461
2
Directional signal wiring harness (12322660)
460/461
a. REMOVAL
1
Disconnect connectors (1 and 2).
2
Remove flat washer (3) and shell (4).
b. DISASSEMBLY
Disassemble wire assembly (see Chapter 6, Section
VII).
c. ASSEMBLY
Assemble wire assembly (see Chapter 6, Section VII).
d. INSTALLATION
1
Install shell (4) and flat washer (3).
2
Connect connectors (1 and 2).
H— 19
