TM 9-2350-256-20
APPENDIX J: LUBRlCATION INSTRUCTIONS
J-5 LUBRICATION INSTRUCTlONS-Continued
a. SERVICE FROM OUTSIDE OF VEHICLE-Continued
1
Spade release mechanism. Clean and coat exposed part of spade lockpin (1) with GAA. Use a hand grease
gun to pump grease into fitting (2) on right side of pin housing.
2
Bearing plate. Clean and coat plate (3) with GAA.
3
Flexible M2 0.50 caliber machine gun. Lubricate machine gun (4) with GAA (refer to TM 9-1005-213-10).
4
Track support rollers. Lubricate with GAA through three fittings (5) on each wheel.
J - 6
Change 1
