TM 9-2350-256-20
APPENDIX J: LUBRICATION lNSTRUCTIONS
J-5 LUBRICATION INSTRUCTIONS-Continued
a. SERVICE FROM OUTSIDE OF VEHICLE-Continued
9
Main winch cable roller. Lubricate with GAA through two fittings (10).
10 Hoist winch cable roller bearings. Open hoist winch cable access cover (11) and lubricate with GAA through
four fittings (12). Close access cover.
11 Commander’s cupola hold-open latch. Lubricate with GAA through fitting (13) at end of pivot pin.
12 Personnel door torsion bar.
NOTE
There are two fittings on each door.
Lubricate with GAA through four fittings (14).
J-8
Change 1
