TM 9-2350-256-20
1
Spade cylinder pins.
a. Front left pin.
Lubricate with GAA through fitting (1) at front of each cylinder and fitting at rear of each cylinder.
b. Front right pin.
(1)
Remove subfloor plate (see paragraph 9-1).
(2) Lubricate with GAA through fitting (2) at front of each cylinder and fitting at rear of each
cylinder.
(3) Install subfloor plate (see paragraph 9-1).
c.
Rear left pin.
(1) Open access door (3).
(2)
Lubricate with GAA through fitting (4) at
front of each cylinder and fitting at rear of
each cylinder.
(3) Close access door (3).
Change 1
J-13
