TM 9-2350-256-2010 Hoist winch gear case drain.NOTEDram oil from hoist winch gear case when oil is at operating temperaturea.Open access door (14)b. Place a suitable receiving container of three-gallon capacity under oil outlet. open hulldrain valves (15); then open hoist winch drainvalve.c.After oil has drained, close hoist winch valve;then close hull dram valve (15).d. Refill hoist winch gear case with appropriateweight of oil (see Table J-1).e.Close access door (13).11 Hoist winch cable.Never handle cable with bare hands.Broken or frayed wire strands can causesevere cuts. Always wear protective(leather) gloves when handling cable.a.Daily. If winch has been used, clean cable (16)and oil with OE.b.Quarterly. Unwind entire cable (16) and cleanit; then oil cable with OE.c.Semiannually. If winch has not been used sincelast semiannual service, unwind and cleanentire cable (16). Brush soak with OE and wipeto remove excess oil. Coat and drain cable withCW before rewinding cable.Change 1J-17
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business