TM    9-2350-256-20  APPENDIX J: LUBRICATION INSTRUCTIONS J-4   WARRANTY   HARD-TIME   STATEMENT For  equipment  under  manufacturer’s  warranty,  hard-time  oil  service  intervals  shall  be  followed.  Intervals  shall  be shortened  if  lubricants  are  known  to  be  contaminated  or  if  operation  is  under  adverse  conditions  (such  as  longer than usual operating hours, extended idling periods, or extreme dust). J-5   LUBRICATION   INSTRUCTIONS TABLE   J-1.   LUBRICANT   TABLE   FOR   MBBA1   MEDIUM   RECOVERY   VEHICLE Expected  Temperatures Interval Lubricants Capacities For  Arctic  Operation,  Refer  to  FM  9-207 Above  15°F +40°F to -10°F 0°F to -65°F (Above   -9°C) (+4°C to -23°C) (-18°C to -54°C) GAA GREASE,   Automotive   As MIL-G-10924 and    Artillery Required All  Temperatures All grease points GO LUBRICATING    OIL, MIL-L-2105 Gear,   Multipurpose or GO  90 GO 90 GOS GOS LUBRICATING    OIL, MIL-L-10324 Gear,   Subzero Hoist   Winch 3  gal Gear Case (11.36  L) Main   Winch 11  gal Gear   Case (41.64  L) OE/HDO LUBRICATING    OIL, MIL-L-2104 Internal  Combustion Engine,   Tactical Service or OEA LUBRICATING    OIL, MIL-L-46167 Internal   Combustion Engine,  Arctic Boom Stayline OE/HDO-10 OE/HDO-10 OEA Cables As Hoist  Winch Required Cable Mechanical 1  gal Transmission (3.79  L) Hydraulic 95 gal Reservoir (359.58  L) CW LUBRICATING   OIL, W-L-751 Chain, Wire Rope, Exposed   Gear As Hoist   Winch   Cable   Required CW-IIC CW-IIB CW-ILA J - 4 Change  1