SECTION V: TROUBLESHOOTING
TM 9-2350-256-20
WARNING
Remove all jewelry such as rings, dog tags,
bracelets, etc. If jewelry contacts a metal
surface a direct short may result in instant
heating of tools, damage to equipment, and
injury or death to personnel.
A Loosen six screws (1) and remove stoplight cover
(2). Remove stoplight lamp (3). Place red lead of
multimeter in socket and black lead to ground.
Turn MASTER switch on, UNLOCK and place
main lighting switch in SER. DRIVE position.
Depress stoplight switch (vehicle brake) and
check for voltage. Turn MASTER, main lighting,
and stoplight switches OFF. If voltage is present,
replace lamp (see paragraph 6-30). If voltage is
not present, go to step B.
2-283
