CHAPTER 3: MAINTENANCE OF ENGINE
TM 9-2350-256-20
3-1 REPLACE POWERPLANT-Continued
NOTE
Cover turbosupercharger openings with tape or caps after removal of air ducts.
27 Remove vehicle left-side air ducts (56) by loosening hose clamps (57 and 58) and removing two screws (59)
and two lockwashers (60).
28 Remove vehicle right-side air ducts (61) by loosening hose clamps (62 and 63). Then remove strap (64) and
bar (65) by removing two screws (66) and two lockwashers (67).
NOTE
Perform step 29a for normal conditions. Perform step 29b if engine mount release rod is inoperable
from engine opening.
29 Release engine mount (67.1).
a
Turn engine mount release rod (68) counterclockwise.
b
Remove access cover (68.1) by removing six screws (68.2) and six lockwashers (68.3). Turn bolt (68.4)
counterclockwise to release engine mount (67.1).
3-6
Change 1
