INSTALLATION (cont) - TM-9-2350-256-20

INSTALLATION (cont) - TM-9-2350-256-20_441

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
427

TM 9-2350-256-20 4 Torque engine mount release rod (68) to 42-48 pound-feet (lb-ft) (57-65 newton-meters [N•m]) to secure engine to hull. NOTE Perform step 4.1 if engine mount (67.1) was accessed and released from underneath hull. 4.1 Install access cover (68.1) with six new lockwashers (68.3) and six screws (68.2). 5 Install vehicle right-side air ducts (61). Secure with strap (64) and bar (65) using two screws (66) and two new lockwashers (67). Place ends of duct into hose clamps (62 and 63). Tighten clamps 6 Install vehicle left-side air ducts (56). Secure with two screws (59) and two new lockwashers (60). Place ends of duct into hose clamps (57 and 58). Tighten clamps. 7 Connect fire extinguisher line (55), main fuel hose (54), primer hose (53), and fuel return hose (52) Change 1 3-9

Privacy Statement
Press Release
Contact