TM 9-2350-256-20
CHAPTER 3: MAINTENANCE OF ENGINE
3-2 REPLACE/SERVICE GROUNDHOP
THIS TASK COVERS
a. Installation
b. Test
c. Removal
INITIAL SET-UP
Tools:
Tool kit, general mechanic’s
(Appendix C, item 53)
Cable assembly, accessories
(Appendix C, item 5)
Cable assembly, generator
armature (Appendix C,
item 6)
Cable assembly, ground
(Appendix C, item 8)
Tools-Continued:
Cable assembly, starter
(Appendix C, item 7)
Clamp (Appendix C, item 9.1)
Filter assembly (Appendix C,
item 13.1)
Hose (Appendix C, item 18.1)
Hose assembly, engine primer
(Appendix C, item 19)
Hose assembly, main fuel line
and fuel injector return line
(Appendix C, item 20)
Personnel Required:
Two
Equipment Condition:
Power-plant removed (see
paragraph 3-1)
a. INSTALLATION
1 Connect generator armature cable assembly (1), ground cable assembly (2), starter cable assembly (3), and
accessories cable assembly (4) between vehicle (5) and engine wiring harness bracket (6).
2 Connect fuel return hose (7) at quick disconnects in vehicle and on engine.
3 Connect primer fuel hose (8) at quick disconnects in vehicle and on engine.
4 Connect main fuel hose (9) at quick disconnects in vehicle and on engine.
3-14
Change 1
