TM 9-2350-256-20
CHAPTER 3: MAINTENANCE OF ENGINE
3-1 REPLACE POWERPLANT-Continued
8 Install emergency fuel shutoff linkage bracket (49) with two screws (50) and two new lockwashers (51).
9 Connect emergency fuel shutoff linkage (45) to link (48) with flat washer (46) and new cotter pin (47).
10 Connect tachometer cable (44).
11 Push hand throttle at driver’s control all the way in and connect throttle linkage (41) by installing screw (42)
and nut (43).
12 Connect generator air intake hose (40) by tightening clamp (39).
13 Install APU housing (36) with three screws (37) and three new lockwashers (38).
14 Install personnel heater exhaust hose assembly (29) with four screws (30), four new lockwashers (31), new
gasket (33), two screws (33), two new lockwashers (34), and new gasket (35).
3 - 1 0
