DISASSEMBLY - TM-9-2350-256-20

REPLACE/REPAIR MANIFOLD HEATER NOZZLE ASSEMBLY

MANIFOLD HEATER OPERATION CHECK - TM-9-2350-256-20_524

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
510

CHAPTER 4: MAINTENANCE OF MAIN ENGINE FUEL, AIR INTAKE, AND EXAUST SYSTEMS TM 9-2350-256-20 4-21 REPLACE/REPAIR MANIFOLD HEATER NOZZLE ASSEMBLY-Continued b. DISASSEMBLY 1 Remove spark plug (with gasket) (2) from manifold heater (8). 2 Loosen locknut (12) and remove manifold heater nozzle assembly (13). 3 Remove screw (14) and baffle (15). c. ASSEMBLY 1 Install screw (14) and baffle (15) to manifold heater (8). 2 Install manifold heater nozzle assembly (13) and tighten locknut (12). 3 Inspect spark plug (with gasket) (2), electrodes, and insulator condition. Replace spark plug (with gasket) if unserviceable. 4 Set spark plug (with gasket) (2) gap at 0.094 to 0.114 in. (2.39 to 2.90 mm). 5 Install new spark plug (with gasket) (2). d. INSTALLATION 1 Install manifold heater (8) and new gasket (9) with four new self-locking nuts (10) and four flat washers (11). 2 Connect fuel return elbow (7) and fuel return tube (6) to manifold heater nozzle assembly (13). 3 Connect new bushing (5), fuel inlet elbow (4), and fuel inlet hose (3) to manifold heater nozzle assembly (13). 4 Connect electrical lead (1) to spark plug (with gasket) (2). 4-46

Privacy Statement
Press Release
Contact