CHAPTER 4: MAINTENANCE OF MAIN ENGINE FUEL, AIR INTAKE, AND EXHAUST SYSTEMS
TM 9-2350-256-20
SECTION III: AIR INTAKE SYSTEM
Para.
Task
Page
4-24
Replace/Repair Air Cleaner ...................................................... .................................................................. 4-50
4-25
Replace Air Cleaner Restriction Gage Assembly ....................................... ................................................. 4-54
4-26
Replace Air Intake Hoses ............................................................................................................................ 4-55
4-27
Replace Engine Seal, Air Inlet ........................................ ............................................................................ 4-58
4-24 REPLACE/REPAIR AIR CLEANER
THIS TASK COVERS
a. Removal
b. Disassembly
c. Service
d. Assembly
e. Installation
INITIAL SET-UP
Tools:
Material/Parts-Continued:
Tool kit, general mechanic's (Appendix C, item 53)
• Lockwashers (6) (Appendix G, item 134)
• Packing, preformed (Appendix G, item 184)
Material/Parts:
• Seals (2) (Appendix G, item 258)
• Adhesive, rubber-base (Appendix D, item 3)
• Lockwashers (4) (Appendix G, item 130)
Reference:
• Lockwashers (10) (Appendix G, item 132)
TM 9-2350-256-10
a. REMOVAL
NOTE
• Removal and installation procedures are the same for both the left- and right-side air cleaners.
• In illustration personnel heater, fire extinguishers, and air purifier shown removed for clarity only.
1
Loosen four wingnuts (1) and remove air cleaner cover assembly (2).
2
Remove wingbolt (3), washer (4), and filter element (5).
4-50
