INSTALLATION - TM-9-2350-256-20

REPLACE ENGINE COOLING FAN SHROUD AND RELATED PARTS

REPLACE/REPAIR ENGINE COOLING FAN VERTICAL SHAFT OIL SEALS

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
531

CHAPTER 5: MAINTENANCE OF ENGINE COOLING SYSTEM TM 9-2350-256-20 5— 4 REPLACE ENGINE COOLING FAN SHROUD AND RELATED PARTS- Continued b. INSTALLATION 1 Install shroud (9) on engine with four screws (10) at end of shroud. 2 Install two screws (11) to rear side of shroud (9). 3 Install six new self-locking nuts (7) and six flat washers (8) to each side of shroud (9). 4 Install support assembly (4) with four screws (5) and four new lockwashers (6). 5 Install shroud mounting (1) with four screws (2) and four new lockwashers (3). NOTE Follow-on maintenance: Install cooling fan housings (see paragraph 5-3) 5— 6

Privacy Statement
Press Release
Contact