DISASSEMBLY - TM-9-2350-256-20

REPLACE/REPAIR ENGINE COOLING FAN HOUSINGS

REPLACE ENGINE COOLING FAN SHROUD AND RELATED PARTS

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
529

TM 9-2350-256-20 CHAPTER 5: MAINTENANCE OF ENGINE COOLING SYSTEM 5-3 REPLACE/REPAIR ENGINE COOLING FAN HOUSINGS-Continued 3 Remove two cooling fan housings (6) by removing four screws (7), four lockwashers (8), and four flat washers (9). b. DISASSEMBLY NOTE Remove inserts only if loose or damaged. Remove eight inserts (10) from two cooling fan housings (6). c. ASSEMBLY Install eight new inserts (10) in two cooling fan housings (6). d. INSTALLATION 1 Install two cooling fan housings (6) by installing four flat washers (9), four new lo&washers (8), and four screws (7). 2 Install two flat washers (4), two screws (3), and two new self-locking nuts (5). 3 Install 2 access covers (1) by installing 10 screws (2). NOTE Follow-on maintenance: Install cooling fans (see paragraph 5-2) 5-4

Privacy Statement
Press Release
Contact