REPLACE EXHAUST MANIFOLD CLAMPS

CHAPTER 5 MAINTENANCE OF ENGINE COOLING SYSTEM

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
525

SECTION IV: EXHAUST SYSTEM TM 9-2350-256-20 4-29 REPLACE EXHAUST MANIFOLD CLAMPS THIS TASK COVERS a. Removal b. Installation INITIAL SET-UP Tools: Parts-Continued: Tool kit, general mechanic's (Appendix C, item 53) Nuts, self-locking (82) (Appendix G, item 177) Parts: Equipment Conditions: • Gaskets (4) (Appendix G, item 51) Engine deck removed (see paragraph 9-51) • Gaskets (16) (Appendix G, item 58) a. REMOVAL Left Side 1 Remove two restraining strap halves (1) by removing screw (2) and self-locking nut (3). Right Side 2 Remove two restraining strap halves (4) by removing screw (5) and self-locking nut (6). b. INSTALLATION Right Side 1 Install two restraining strap halves (4) with screw (5) and new self-locking nut (6). Left Side 2 Install two restraining strap halves (1) with screw (2) and new self-locking nut (3). NOTE Follow-on maintenance: Install engine deck (see paragraph 9-51) 4-61 (4-62 blank)

Privacy Statement
Press Release
Contact