SECTION I: ENGINE COOLING FANS
TM 9-2350-256-20
5— 4 REPLACE ENGINE COOLING FAN SHROUD AND RELATED PARTS
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SET-UP
Tools:
Parts-Continued:
Equipment Condition:
Tool kit, general mechanic's
·Lockwashers (4) (Appendix G,
Cooling fan housings removed
(Appendix C, item 53)
item 132)
(see paragraph 5-3)
·Lockwashers (4) (Appendix G,
Parts:
item 96)
·Lockwashers (4) (Appendix G,
·Nuts, self-locking (12)
item 132)
(Appendix G, item 166)
a.
REMOVAL
1
Remove shroud mounting (1) by removing four screws (2) and four lockwashers (3).
2
Remove support assembly (4) by removing four screws (5) and four lockwashers (6).
3
Remove six self-locking nuts (7) and six flat washers (8) from each side of shroud (9).
4
Remove four screws (10) from end of shroud (9).
5
Remove two screws (11) from rear side of shroud (9).
6
Remove shroud (9) from engine.
5—
5
