SECTION II: GAGES AND SWITCH PANELS
TM 9-2350-256-20
6-10 REPLACE/REPAIR MAIN SWITCH PANEL ASSEMBLY
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
Parts:
Tool kit, general mechanic's (Appendix C,
Drivescrews (2) (Appendix G, item 19)
item 53)
Lockwashers (12) (Appendix G, item 104)
Riveter, blind (Appendix C, item 42)
Lockwashers (2) (Appendix G, item 107)
Lockwashers (2) (Appendix G, item 150)
Rivets, blind (4) (Appendix G, item 235)
WARNING
Be certain MASTER switch is OFF when working on electrical system to avoid electrical shock and
bums.
a. REMOVAL
1
Remove two nuts (1), three screws (2), three lockwashers (3), end of ground lead (4), and flat washer (5) from
main switch panel (6).
NOTE
Identify connectors upon removal to ensure proper installation.
2
Pull main switch panel (6) forward and disconnect three connectors (7).
6-31