CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITSTM 9-2350-256-206-79 REPLACE/REPAIR APU CONTROL BOX TO FOOT DIMMER SWITCH ANDBULKHEAD WIRING HARNESS (DUAL VOLTAGE) (11672466)-Continued5 Disconnect connector (4) from gage panel to bulkhead wiring harness (16).6 Disconnect connector (5) from rigger's light selector switch (17).7 Disconnect connector (6) from bulkhead disconnect(18) by removing four screws (19), four 'lockwashers (20), and gasket (21).8 Disconnect two connectors (7 and 8) from switchpanel to neutral safety to bulkhead wiring harness(22).b. DISASSEMBLYDisassemble wiring harness (see Chapter 6, Section VII).c. ASSEMBLYAssemble wiring harness (see Chapter 6, Section VII).d. INSTALLATION1 Connect two connectors (7 and 8) to switch panel toneutral safety to bulkhead wiring harness (22).2 Connect connector (6) to bulkhead disconnect (18)using new gasket (21), four new lockwashers (20), and four screws (19).3 Connect connector (5) to rigger's light selector switch (17).4 Connect connector (4) to gage panel to bulkhead wiring harness (16).6-214
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
