CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-91 REPLACE/REPAIR SMOKE GRENADE LAUNCHER SYSTEM WIRING
HARNESS (11672299)-Continued
6 Disconnect connector (6) from accessory panel
auxiliary outlet Y-connector (13).
7 Remove three clamps (14) by removing screw (15)
from each.
8 Remove four clamps (16) by removing screw (17)
and lockwasher (18) from each.
9 Remove seven straps (19) by removing screw (20)
from each.
10 Remove tie down strap (21).
b. DISASSEMBLY
Disassemble lead assembly (see Chapter 6, Section VII).
c. ASSEMBLY
Assemble lead assembly (see Chapter 6, Section VII).
d. INSTALLATION
1 Install tie down strap (21).
2 Install seven straps (19) using screw (20) for each.
3 Install four clamps (16) using new lockwasher (18) and screw (17) for each.
4 Install three clamps (14) using screw (15) for each.
5 Connect connector (6) to accessory panel auxiliary outlet Y-connector (13).
6-242
