CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITS
TM 9-2350-256-20
6-98 REPLACE/REPAIR SMOKE GENERATING SYSTEM LEAD ASSEMBLY
(11672473-1 )--Continued
WARNING
Be certain MASTER switch is OFF when working on electrical systems to avoid electrical shock and bums.
Connector No.
Electrical Lead To:
Wire No.
1
Fuel solenoid wiring harness
T
2
Engine disconnect to starter wiring harness at engine
T
disconnect
a. REMOVAL
1 Disconnect connector (1) from fuel solenoid wiring
harness (3).
2 Disconnect lead (2) from engine disconnect to
starter wiring harness at engine disconnect (4).
b. DISASSEMBLY
Disassemble lead assembly (see Chapter 6, Section
VII).
c. ASSEMBLY
Assemble lead assembly (see Chapter 6, Section VII).
d. INSTALLATION
1 Connect lead (2) to engine disconnect to starter
wiring harness at engine disconnect (4).
2 Connect connector (1) to fuel solenoid wiring harness (3).
NOTE
Follow-on maintenance: Install engine deck (see paragraph 9-51)
6-254
