SECTION VI: MISCELLANEOUS ELECTRICAL COMPONENTS
TM 9-2350-256-20
7
Remove cable assembly (14) from inside vehicle by removing screw (15) and clamp (16) and pulling three
leads (2) through hull.
8
Unscrew terminal (10) and remove from hull.
b. INSTALLATION
1
Install terminal (10) to hull.
2
Install cable assembly (14) to inside vehicle using clamp (16) and screw (15).
3
Pull three leads (2) through hull, install wire braid (13), and connect two leads (9) to terminal (10) using two screws
(11). Install strap (12).
4
Install terminal (6) and cover (7) to three leads (2) using two screws (8).
5
Install cover (7) to terminal (6).
6
Connect connector (4) to horn assembly (5).
7
Connect connector (1) to smoke grenade launcher system wiring harness (3).
NOTE
Follow-on maintenance:
Install discharger (see paragraph 15-2)
6-263
