CHAPTER 6: MAINTENANCE OF ELECTRICAL SYSTEMS AND CIRCUITSTM 9-2350-256-206-112 REPAIR TYPICAL FEMALE-TYPE PANEL MOUNTING RECEPTACLE (WITH RIDGED LOCKING NUT)THIS TASK COVERSa. Disassemblyb. AssemblyINITIAL SET-UPTools:Reference:Tool kit, general mechanic's (Appendix C, item 53)TB SIG 222WARNINGBe certain MASTER switch is OFF when working on electrical system to avoid electrical shock and bums.a. DISASSEMBLY1Unscrew nut (1) from shell assembly (2) and slide back on cable leads (3).2Slide grommet (4) back on cable leads (3).3Drive socket contacts (5) out through front of insert (6) with pin extractor.4Unsolder cable leads (3) from socket contacts (5). Push insert (6) out through rear of shell (2).b. ASSEMBLY1Strip cable leads (3) insulation equal to depth of solder wells of socket contacts (1).2Slide nut (1) over cable leads(3).3Slide grommet (4) over cable leads (3).4Insert cable leads (3) into solder wells of socket contacts (5) and solder (use resin core solder only) (refer to TB SIG 222).5Push insert (6) into shell (2) from rear until seated. Groove (7) in insert must be aligned with guide in shell (4) to ensure proper fit.6Push socket contacts (5) into insert (6) from rear until seated.7Push grommet (4) down cable leads (3) and over solder wells of socket contacts (5).8Screw nut (1) onto shell assembly (2).6-268
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
