REPLACE/REPAIR COMMANDERS CUPOLA ASSEMBLY

TM-9-2350-256-20 Carrier Cargo Tracked 6-Ton M548A1 (2350-01-096-9356) M548A3 2350-01-369-6081 Manual
Page Navigation
900

TM 9-2350-256-20 CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS NOTE Follow-on maintenance: •Raise spade (refer to TM-9-2350-256-10) • Install tow cables if required for clearance (see paragraph 9-89) 9-27 REPLACE/REPAIR COMMANDER’S CUPOLA ASSEMBLY THIS TASK COVERS a. Removal b. Disassembly c. Assembly d. Installation INITIAL SET-UP Tools: • Took kit, general mechanic’s (Appendix C, item 53) • Key, socket head screw (Appendix C, item 23) • Key,, socket head screw (Appendix C, item 24) • Pliers, retaining ring, external (Appendix C, item 31) • Socket set (Appendix C, item 49) • Wrench, torque (Appendix C, item 62) Materials/Parts: • Adhesive (Appendix D, item 3) • Compound, sealing (Appendix D, item 27) • Grease (Appendix D, item 13) • Lockwashers (8) (Appendix G, item 124) Materials/ Parts-Continued: • Lockwashers (8) (Appendix G, item 130) • Lockwashers (17) (Appendix G, item 132) • Lockwashers (30) (Appendix G, item 134) • Lockwires (2) (Appendix G, item 157) • Pin, spring (Appendix G, item 228) • Pins (2) (Appendix G, item 204) • Seal (Appendix G, item 248) Personnel Required: Two Reference: Deleted NOTE If mounting plate is to be removed for clearance in removal and installation of hydraulic reservoir, hoist winch, mechanical transmission and main hydraulic pump, or other interior items, it is not necessary to remove cupola from mounting plate. Remove mounting plate with cupola mounted. a. REMOVAL 1 Remove 12 screws (1). 2 Remove 12 socket nuts (2). OUTSIDE VIEW INSIDE VIEW 9-36 Change 1

Privacy Statement
Press Release
Contact