CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-27 REPLACE/REPAIR COMMANDER'S CUPOLA ASSEMBLY--Continued
NOTE
Remove pins (18 and 19) only if
replacement is necessary.
4
Remove from gun support pintle (15), setscrews (20
and 21), nut (22), block (23), adapter (24), screw
(25), two buttons (26), and pin (18). File or grind
off beveled ends of pin to remove.
5
Remove seal (27). Clean all dirt and adhesive from
gun ring assembly (28).
6
Remove lock ring shoe (29) by removing bolt (30),
pin (19), and two buttons (31). File or grind off
beveled ends of pin to remove.
7
Remove eight screws (32) and eight lockwashers
(33). Lift out padding assembly (34).
9-38
