TM 9-2350-256-20
CHAPTER 9:
MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
9-29 REPLACE/REPAIR MECHANIC’S CAB-TOP DOOR AND RELATED PARTS
THIS TASK COVERS
a. Removal
b. Disassembly
c. Assembly
d. Installation
INITIAL SET-UP
Tools:
• Tool kit, general mechanic’s
(Appendix, C, item 53)
• Pliers set, retaining
(Appendix C, item 29)
Material/Parts:
• Adhesive (Appendix D, item 1 or 2)
• Lockwashers (5) (Appendix G, item 132)
• Nuts, self-locking (3) (Appendix G, item 171)
• Packing (Appendix G, item 180)
• Pin, cotter (Appendix G, item 211)
• Seal (Appendix G, item 256)
Personnel Required:
Three
Reference:
Deleted
a. REMOVAL
1
Raise mechanic’s cab-top door (1) about 2 in. (51
mm) to aline self-locking nuts (2 and 3) on arm
control pin (4) with opening in shaft housing (5).
2
Remove control arm (6) by removing self-locking
nut (2), arm control pm (4), washer (7), and self-
locking nut (3).
3
Remove mechanic’s cab-top door (1) by pulling up
through shaft housing (5).
4
Remove seal (8) from mechanic’s cab-top door (1).
5
Remove shaft housing (5) by removing five screws
(9) and five lockwashers (10).
9 - 4 8
Change 1
