SECTION II: HULL AND CAB COMPONENTS
a. REMOVAL
TM 9-2350-256-20
NOTE
See paragraph 9-38 for removal, disassembly, assembly, and installation of passive night viewer
mount.
1
Raise driver’s cab-top door (1) about 2 inches (in.)
(51 millimeters [mm] ) to aline self-locking nuts (2
and 3) on arm control pin (4) with opening in shaft
housing (5).
2
Remove control arm (6) by removing self-locking
nut (2), arm control pin (4), washer (7), and self-
locking nut (3).
3
Remove driver’s cab-top door (1) by pulling up
through shaft housing (5).
4
Remove rubber strip (S) from driver’s cab-top door
(1).
5
Remove shaft housing (5) by removing five screws
(9) and five lockwashers (10).
9 - 4 5
