CHAPTER 9: MAINTENANCE OF HULL- AND CAB-RELATED COMPONENTS
TM 9-2350-256-20
9-49 REPLACE APU ACCESS COVER ASSEMBLY-Continued
NOTE
Slide APU exhaust cover (8) forward to clear
exhaust gate (9).
3
Remove APU exhaust cover (8) by removing six
screws (10), six lockwashers (11), two screws (12), two
lockwashers (13), and two washers (14).
4
Separate APU exhaust cover (8) from muffler guard
(15) by removing four bolts (16) and four lockwashers
(17).
5
Remove exhaust gate (9) from exhaust cover by
removing screw (18), lockwasher (19), and washer
(20).
6
Remove clamp (21) and shim (22) at elbow (23).
7
Remove two nuts (24), eight flat washers (25), four
springs (26), two studs (27), two nuts (28), two
lockwashers (29), two screws (30), two straps (31),
and APU muffler (32).
9-80
