SECTION II: HULL AND CAB COMPONENTS
TM 9-2350-256-20
8
Remove five screws (33), five lockwashers (34), two screws (35), two lockwashers (36), two screws (37), and two
lockwashers (38).
WARNING
Keep clear of equipment when equipment is being raised or lowered. Equipment
may fall causing severe injury or death to personnel.
9
Open APU access door (39) and remove APU access cover (40) using lifting device.
b. INSTALLATION
WARNING
Keep clear of equipment when equipment is being raised or lowered. Equipment
may fall causing severe injury or death to personnel.
1
Place APU access cover (40) using lifting device. Install APU access cover (40) with five screws (33), five new
lockwashers (34), two screws (35), two new lockwashers (36), two screws (37), and two new lockwashers (38).
Close APU access door (39).
2
Install APU muffler (32) with shim (22) and clamp (21) at elbow (23), and two straps (31), two screws (30), two new
lockwashers (29), two nuts (28), two studs (27), four springs (26), eight flat washers (25), and two nuts (24).
3
Install exhaust gate (9) with screw (18), new lockwasher (19), and washer (20).
4
Install APU exhaust cover (8) to muffler guard (15) with four bolts (16) and four new lockwashers (17).
5
Install APU exhaust cover (8) with six screws (10), six new lockwashers (11), two screws (12), two new lockwashers
(13), and two washers (14).
9-81
