TM 9-2350-256-34-1
d. Installation. Install the main winch or hoist
winch brake cylinder and adjust in reverse order of
removal.
2-39. Main Winch and Hoist Winch Brake Band
Assemblies
a. General. The main winch and hoist winch
brake band assemblies are removed and replaced in
the same manner. Remove subfloor plate 2 (fig. 2-3)
for access to the main winch brake adjusting screw
and subfloor plate 5 (fig. 2-3) for access to the hoist
winch brake adjusting screw. The brake adjusting
screw (View B, fig. 2-38), which compresses the
brake cylinder springs, must be loosened prior to
removing the brake band assembly and readjusted
during installation.
b. Removal, Remove subfloor plate 1 (fig. 2-3)
for access to the main winch brake band assembly or
plate 5 (fig. 2-3) for the hoist winch brake band
assembly. Remove and install brake band assem-
blies as shown in figure 2-38.
Figure 2-37. Winch brake cylinder—removal test, installation and adjustment.
2-70
Change 2
