TM 9-2350-256-34-1
VIEW H. PUMP AND CABLE ASSEMBLY
Figure 3-6. Electric fuel pump and mount assembly-disassembly and assembly (Sheet 2 of 2).
3-20
Cleaning.
After disassembly and before inspection, clean metal
parts in clean diesel fuel or drycleaning solvent. Clean
tube in mild soap solution. Carefully blow out and dry
each part with compressed air.
3-21.
Inspection and Repair
a.
Inspection
(1)
Inspect pump for cracks, distortion and
warpage.
(2)
Inspect cable for cuts, damage and
continuity.
(3)
Inspect tube assembly for cracks and
other evidence of excessive wear in tube and for
damage to swivel end.
(4)
Check continuity of ground cable and
inspect for cuts or other damage.
(5)
Inspect welded and support parts for
cracks, distortion and breakage.
3-12 CHANGE 7