TM 9-2350-256-34-2
lector valve in the REFUEL position, the hydraulic pressure is directed to the adjustable flow regulator and is blocked at
the four-way selector valve, which is in the Closed position. Pressure is then directed through the impact wrench and
returns to the reservoir (port No. 245).
Section IV. REMOVAL AND INSTALLATION OF MAJOR COMPONENTS
2-12. Hoisting Boom Assembly (Fig. 1-3)
Instructions for removal and installation of the hoisting boom assembly are contained in TM 9-2350-256-34-1.
2-13. Main Winch and Spade Assembly (Fig. 1-3)
Instructions for removal and installation of the main winch and spade assembly are contained in TM 9-2350-256-34-1.
2-14. Hydraulic Subplate Assembly (Fig. 1-3)
Instructions for removal and installation of the hydraulic subplate assembly are contained in TM 9-2350-256-34-1.
2-15. Mechanical Transmission and Main Hydraulic Pump Assembly (Fig. 1-3)
Instructions for removal and installation of the mechanical transmission and main hydraulic pump assembly are
contained in TM 9-2350-256-34-1.
2-16. Hoist Winch Assembly (Fig. 1-3)
Instructions for removal and installation of the hoist winch assembly are contained in TM 9-2350-256-34-1.
2-17. Hydraulic Oil Tank Assembly (Fig. 1-3)
Instructions for removal and installation of the hydraulic oil tank assembly are contained in TM 9-2350-256-34-1.
2-18. Spade Subplate and Combination Control Valve Assembly (Fig. 1-3)
Instructions for removal and installation of the spade subplate and control valve assembly are contained in TM 9-2350-
256-34-1.
2-19. Flow Regulator Subplate Assembly (fig. 1-3)
Instructions for removal and installation of the flow regulator subplate assembly are contained in TM9-2350-256-34-1.
2-27
