TM 9-2350-256-34
0034 00
NOTE
Perform the following steps at right front corner--engine compartment.
27. Disconnect lead (62) to pressure switch (63).
28. Disconnect lead (64) to transmitter (65).
29. Remove screw (66), washer (67), and clamp (68).
30. Remove four screws (69), washers (70), and clamps (71).
31. Remove eight nuts (72), lockwashers (73), and screws (74). Discard lockwashers.
32. Disconnect two APU wiring harnesses (75).
33. Remove wiring harness (3).
Repair or Replacement
1.
Repair wiring harness as required in accordance with WP 0033 00.
2.
Replace missing or defective grommets as required.
0034 00-6
