TM 9-2350-256-34
0034 00
Installation
NOTE
Perform the following steps at right front corner--engine compartment.
1.
Place wiring harness (3) into position.
2.
Connect two APU wiring harnesses (75).
3.
Install eight screws (74), lockwashers (73), and nuts (72).
4.
Install four clamps (71), washers (70), and screws (69).
5.
Install clamp (68), washer (67), and screw (66).
6.
Connect lead (64) to transmitter (65).
7.
Connect lead (62) to pressure switch (63).
0034 00-7
