TM 9-2350-256-34
0034 00
NOTE
Perform the following steps at left rear--engine compartment.
29. Install clamp (hidden) (13), washer (12), and screw (11).
30. Install four clamps (10), washers (9), and screws (8) to wiring harness (3).
NOTE
Perform the following steps at right rear--engine compartment.
31. Install clamp (hidden) (7), washer (6), and screw (5).
32. Connect two leads (4) to B.O. marker.
33. Connect two leads (2) of wiring harness (3) to rigger's light and install grommet (hidden) (1).
END OF WORK PACKAGE
0034 00-11/12 blank