TM 9-2350-256-34
INTERMEDIATE MAINTENANCE
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
NSN 2350-00-122-6826, EIC AQA
MAIN WINCH MOTOR REPLACEMENT
REMOVAL, INSTALLATION
INITIAL SETUP:
Materials/Parts (cont.)
Tools and Special Tools
Tool kit, general mechanic's (item 34, WP 0086 00)
Packing (item 137, WP 0087 00)
Screws (7) (item 70, WP 0087 00)
Materials/Parts
Screws (4) (item 71, WP 0087 00)
Screws (3) (item 76, WP 0087 00)
Gasket (item 7, WP 0087 00)
Screws (8) (item 216, WP 0087 00)
Lockwashers (8) (item 162, WP 0087 00)
Screw (item 219, WP 0087 00)
Lockwashers (11) (item 163, WP 0087 00)
Packings (2) (item 132, WP 0087 00)
Equipment Condition
Packings (2) (item 133, WP 0087 00)
Packings (2) (item 134, WP 0087 00)
Subfloor plates 2, 3, and 23 removed (TM 9-2350-256-20)
Removal
NOTE
Use Hydraulic Motor Kit 11672160 on retrofitted vehicles when replacing a motor which is not a
Dennison Model No. M4E-185-3N00-B101-M40712.
1.
Disconnect two hydraulic lines (1).
2.
Remove eight screws (2), lockwashers (3), and two adapter blocks (4) with hydraulic lines (5) attached. Discard lockwash-
ers.
3.
Remove two recessed packings (hidden) (6) and discard.
4.
Disconnect hydraulic line (7), two hydraulic lines (8), and three hydraulic lines (9).
5.
Remove four screws (10).
0052 00-1
