TM 9-2350-256-34
0083 00
3.
Install generator bearing retainer (128) and six studs (123).
4.
Install four washers (127), screws (126), and screws (125) to back of chain case (83).
NOTE
Prior to installation, the generator (122) must meet a locked rotor torque test of 30 lb-ft (40.7 Nm)
output torque for an input voltage of 15 volts applied to both fields and armature circuits.
5.
Loosely assemble six washers (124) and nuts (121) on studs (123). Align nuts with slots on generator (122), rotate generator
clockwise, and tighten six nuts.
0083 00-17
