TM 9-2350-256-34
0083 00
29. Connect lead (57).
30. Connect lead (56) and install washer (55) and screw (54).
31. Connect ground cable (53), armature cable (52), and two leads (51) and install four washers (50) and nuts (49).
NOTE
Drill thru 0.125 (+ 0.005, -0.000 in.) (3.18 [+0.127, -0.000 mm]) diameter when assembling screws (47)
on engine.
32. Install air inlet duct (48), four screws (47), and screw (46).
34. Connect ground lead (44) and install washer (43) and screw (42).
35. Install shell (hidden) (41) and connect lead (hidden) (40).
0083 00-22