TM 9-2350-256-34
0083 00
18. Install generator duct (94), generator clamp (93), pin (92), and cotter pin (91).
19. Connect clamp (90) and tighten screw (89) and nut (88).
20. Install bushing (hidden) (87) and key (hidden) (86).
21. Install sprocket (84) and chain (85). Position alignment gage so that all four feet are flat against chain case (83) and gage
plate is between sprocket teeth. Install plate (not shown) (82), lockwasher (not shown) (81), and screw (not shown) (80).
Torque screw to 5055 lb-ft (67.874.6 Nm).
0083 00-20
