TM 9--2350--292--10
OPERATE HOIST WINCH -- CONTINUED
0048 00
WARNING
Do not exceed 70,000-lbs (31,780 kg) lift capacity of hoist winch. Failure to comply may
result in failure of the hoist winch causing the load to free fall resulting in injury or DEATH to
personnel or damage to equipment.
Never use hoist winch with less than five wraps on the drum. Failure to comply may result in
hoist winch cable coming loose from drum causing injury to personnel or damage to
equipment.
CAUTION
Use lockout blocks for load between 12,001 and 50,000 lbs (5,443 to 22,680 kg) and spade
for load between 50,001 and 70,000 lbs (22,680 to 31,780 kg). Failure to comply may result
in over compression of the suspension causing damage to equipment.
Minimum engine speed for winching operation is 1,000 rpm. Engine speed for normal
operating conditions is 1800 rpm. Engine speed should be increased to a maximum of 2000
rpm for hot weather or continuous operation. Operating outside limits may result in damage
to equipment.
4. Move HOIST WINCH operating lever (1) to RAISE to hoist load.
5. Release the HOIST WINCH operating lever (1) to HOLD load in that position.
6. Move HOIST WINCH operating lever (1) to LOWER position to lower load.
7. Close hoist winch lever cover.
END OF TASK
0048 00--3/4 blank
