TM 9--2350--292--10
0047 00--14
OPERATE BOOM -- CONTINUED
0047 00
LOWERING BOOM -- CONTINUED
CAUTION
Always keep boom in stowed (travel lock) position when not in use. Failure may result in damage
to boom or hydraulic system due to impact or vibration while traveling on uneven terrain.
8. Release catch on boom latch (3) and lock boom in stowed position.
9. Secure hook block in boom tray with straps.
3
18i215ma
10. Close hoist winch cable access door (WP 0029 00).
LOCKOUT BLOCKS
Lockout blocks are used when lifting and carrying loads from 12,001 to 50,000 pounds (5,443 to 22,680 kg). Lock-
out blocks prevent damage to the front suspension system.
Installing lockout blocks
1. Raise front of vehicle by driving up on spade (WP 0046 00).
2. Lock brakes and shut off engine.
3. Open side armor skirt panel #2 (WP 0102 00).
4. Remove lock screws (1), lockwashers (2), and flat washers (3) from lockout block spacer (4) and bumper stop
assembly (5).
5. Loosen screw (6) securing lockout block spacer (4) to bumper stop assembly (5). Swing lockout block spacer (4)
90° to inside, secure lockout block spacer (4) in 90° position.
6. Slide lockout block (7) on top of inside spindle (8) of front of roadwheel arm (9).
90
1
3
2
5
4
6
7
8
9
5
7
