TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_300

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_302

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
279

TM 9--2350--292--10 0101 00--27 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item toCheck/ Service Interval COMMANDER 6 After Cupola a. Check that cupola lock locks movement of the cupola. Release lock and test cupola for ease of movement (WP 0025 00). b. Check hatch operation. a. Cupola moves when lock is locked. Cupola does not move easily. b. Hatch will not lock in open or closed position. CUPOLA LOCK HATCH CONTROL LEVER COMMANDER 7 After Electro-- Magnetic Clutch Reservoir Oil Level Park vehicle on level surface. Start main engine (WP 0012 00) and operate electromagnetic clutch for 5 minutes. Shut off engine (WP 0019 00). Open subfloor access door (WP 0036 00), remove bayonet gauge and wipe clean. Reinsert bayonet gauge. Remove bayonet gauge and verify oil level reaches the F (full) mark. If required, remove vent/fill cap and add proper grade oil (Table 6, WP 0101 00) until oil level reaches full mark on bayonet gauge. Close subfloor access door (WP 0036 00). Class III oil leaks. OIL FILL MAX MIN BAYONET GAUGE OIL LEVEL CHECK

Privacy Statement
Press Release
Contact