TM 9--2350--292--10
0101 00--30
PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING
LUBRICATION INSTRUCTIONS -- CONTINUED
0101 00
TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER--CONTINUED
Item No.
Not Fully Mission
Capable If:
CREWMEMBER
Procedure
LOCATION
Item toCheck/
Service
Interval
COMMANDER
9
After
Main Winch Oil
Level
Park vehicle on a level surface. Remove
subfloor plate (WP 0036 00). Remove
bayonet gauge, wipe clean, insert, remove
again and verify oil level is at FULL mark.
To add oil to the main winch, remove the
bayonet gauge, install a funnel in the tube
and add the proper grade of oil (Table 6,
WP 0101 00). Check oil level with the
bayonet gauge. Add oil until the oil level
reaches the full mark. Remove the funnel
and install the bayonet gauge. Install
subfloor plate (WP 0036 00).
Class III oil leaks
ACCESS PLATE
L
F
OIL LEVEL
CHECK/FILL
BAYONET GAUGE
