TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_305

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_307

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
284

TM 9--2350--292--10 0101 00--32 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item toCheck/ Service Interval EXTERIOR DRIVER/MECHANIC 12 After Snatch Block Assembly One 140--Ton, One 6.5--Ton, One 35--Ton Hook Block a. Clean and visually inspect for presence. b. Inspect all snatch block housings for any cracks/defects. Inspect pulley for chips, dents and cracks. Inspect locking mechanisms for locking capabilities. Inspect hooks for cracks and straightness. a. Any snatch block assembly missing. b. Blocks are cracked and/or do not lock. Safety screw missing from 35--ton block. Hook on block is bent. Pulleys bent. SNATCH BLOCK (140 TON) HOOK BLOCK (35 TON) SAFETY SCREW SNATCH BLOCK (6.5 TON) ENGINE COMPARTMENT DRIVER 13 After Engine Compartment Raise boom (WP 0047 00) and open engine deck access doors (WP 0035 00). Check for fluid leaks. Any fuel leak or Class III oil leak.

Privacy Statement
Press Release
Contact