TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont)

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_307

TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER (cont) - TM-9-2350-292-10_309

TM-9-2350-292-10 Carrier Ammunition Tracked M992A1(NSN 2360-01-362-3021) EIC:AE6 Manual
Page Navigation
286

TM 9--2350--292--10 0101 00--34 PREVENTIVE MAINTENANCE CHECKS AND SERVICES INCLUDING LUBRICATION INSTRUCTIONS -- CONTINUED 0101 00 TABLE 3 PREVENTIVE MAINTENANCE CHECKS AND SERVICES, AFTER--CONTINUED Item No. Not Fully Mission Capable If: CREWMEMBER Procedure LOCATION Item toCheck/ Service Interval 14 cont After Transmission Oil Level -- Continued DRIVER a. Park vehicle on a level surface with parking brake applied. b. Operate engine (WP 0012 00) to warm transmission oil to temperature between 180 to 200 F (82 to 93 C). To reach desired transmission oil temperature, it may be necessary to perform high range stall. To perform stall: depress and hold brake in applied position, place transmission in 3rd range and run engine at full throttle for no longer than 30 seconds. Return engine speed to idle. If required, repeat procedure after 60 seconds of idling to attain the proper oil temperature. c. Shut down engine (WP 0019 00). Oil level below ADD mark. To verify that proper transmission oil level is present, it is very important that transmission oil level is at correct temperature and that correct amount of time, 3 to 5 minutes, has passed before reading oil gauge rod. Failure to comply may result in an inaccurate oil level reading. If vehicle is operated with transmission oil level below ADD mark, reliability and durability of transmission assembly may be reduced. CAUTION

Privacy Statement
Press Release
Contact